Sunday, August 21, 2011

Hexagonal Expanded Metal Mesh

Hexagonal Expanded Metal Mesh
ISO9001:2008
LWM:3.0MM-100MM
SWM:2.0MM-80MM
Strand Width: 0.3MM-8.0MM

Hexagonal Expanded Metal Mesh
Zinc Coated Expanded Metal Mesh
SWD: Plus 1/4" minus 0" per foot of width
LWD: Plus 3/4 minus 0"
Flattened Mesh
SWD: Plus 1/4" minus 0" per foot of Width
LWD: Plus 3/4" minus 0"
Grating
SWD: Plus 1/4" minus 0" per foot of width
Camber
Measured by placing a straight edge along the concave side of the sheet parallel to the LWD, touching both ends. The maximum distance from the edge expanded metal to the straight edge is the camber
Raised Mesh
1/16" per foot of length
Flattened Mesh
3/32" per foot of length
Out of Square
Expanded metal sheets are not perfectly square as manufactured. Stock size sheets and machine run non standard size sheets will be produced to the following tolerances
SWD: 1/16" per foot of Width
LWD: 1/16" per foot of length
Sheets That have to be perfectly square must go through a secondary process of shearing.
Flattening
Flattened sheet thickness shall be plus or minus 10% of published thickness or strand thickness
Non Standard Sheets
Machine Run
Where tolerances permit, machine run non standard sheet sizes are manufactured to the same tolerances as stock size sheets
Random Shearing
Stock size sheets can be random sheared when a closer tolerance is required. This is a secondary process.
Bond Shearing
Bond shearing can sometimes be performed, with limitations. This is a secondary process.
Finishes:
Cleaning - Carbon expanded metal is lightly oiled and should be cleaned before finishing. The most common cleaning method is an acid or solvent bath with a water rinse. For aluminum, use a non-etching chemical or detergent, then rinse and dry thoroughly.
Anodizing - A surface treatment for aluminum where an oxide coating is added electrochemically to the metal. For interior abrasion resistance a .0025" coating is necessary. Medium abrasion applications for interior or maintained exteriors need a .0004" coating. Use a .0008" coating for exteriors.
Porcelain Enamel - Porcelain enamels can be readily applied to expanded metal. Forming, cutting, welding and drilling should be done before applying the finish. All surfaces should be covered.
Painting, Lacquering, Plastic Coating - Be sure the coating used has good surface tension or wetting properties and viscosity to prevent any pullback from metal edges and webbing-in of diamonds.
Galvanizing - Hot dip galvanizing is primarily a protective coating and may have a rough uneven appearance. Where smooth finish is required, other coatings and protective methods should be used. Certain small expanded metal styles do not lend themselves to hot dip galvanizing because the openings become filled with zinc. Warping or distortion may occur during hot dip galvanizing due to the heat of the molten zinc.For these reasons patterns lighter than 18 gauge, with openings of 1/2" or less or any patterns with a weight per square foot of 0.45 lbs or less are not recommended to be galvanized.








Hexagonal Gabion Mesh

Gabion Mesh
Mesh wire Gi. Dia.:2.0mm,2.2mm,2.7mm
Selvedge Wire Gi.Dia:2.7mm,3.0mm,3.4mm
1x1x2m
Galvanized,Galfan,PVC Coated
Gabion Mesh
Mesh wire Gi. Dia.:2.0mm,2.2mm,2.7mm
Selvedge Wire Gi.Dia:2.7mm,3.0mm,3.4mm
1x1x2m
Galvanized,Galfan,PVC Coated

gabions, hexagonal wire netting, hexagonal wire mesh, gabion box, rockfall netting, rock mattress

Manufactured from cold drawn steel wire, electrically welded at each intersection welded mesh gabions and mattresses provide an alternative to the traditional woven wire construction. Welded mesh baskets are more rigid and create a more uniform finish when erected, and are appropriate where tight tolerances are required to the finished profile.

Opening
(mm)
Wire Diameter(Metal Wire) (mm)
Wire Diameter (PVC Coate)/ Inner/Outside(mm)
Strands
60X80
Ø2.0-2.8
Ø2.0/3.0-2.5/3.5
3
80X100
Ø2.0-3.2
Ø2.0/3.0-2.8/3.8
3
80X120
Ø2.0-3.2
Ø2.0/3.0-2.8/3.8
3
100X120
Ø2.0-3.4
Ø2.0/3.0-2.8/3.8
3
100X150
Ø2.0-3.4
Ø2.0/3.0-2.8/3.8
3
120X150
Ø2.0-4.0
Ø2.0/3.0-3.0/4.0
3

Gabion Mesh


Gabion Mesh Uses

Hexagonal Gabion

Professional Factory /ISO9001
1>Hexagonal Gabion
2>Mesh:80*100mm
3>Wire:2.7mm,3.2mm
4>.Size:2x1x1m,2x1x0.3m
Gabion


is a kind of hexagonal wire mesh that is made of steel wires. The size of the wire is according to the different sizes of hexagonal box. For steel wire, the sizes from 2.0mm to 4.0mm can be adopted. and for PVC coated wire, the size from 3.0 to 4.5mm, will be used as a mesh wire ,and the lacing wire is generally heavier than the mesh wire.

Feature:
Economic. Just fill the stone into the gabions and seal it.
Simple installation. No special technology needed.
Weather proof under natural destroy, corrosion resistant.
No collapse even under big scope of deforming.
Sludge in the stones is good for plant growing. Mixed to form a integrity with the natural environment.
Good permeation can prevent the damage by hydrostatic.
Less transport freight. It can be folded together for transport and further installation.

Gabions is made of PVC coated wires,
includes the following sizes:
apetures, wire diameters
(PVC coated) inside/outside
60*80
2.0mm/3.0mm-2.8mm/3.8mm
80*100
2.2mm/3.2mm-3.0mm/4.0mm
100*120
2.4mm/3.4mm-3.2mm/4.2mm
120*150
2.7mm/3.7mm-3.5mm/4.5mm

The Specification Of Gabion Box

Length
Width
Height
Diaphragm
Volume
Tolerance
2.0m
1.0m
0.3m
1
0.6m3

3.0m
1.0m
0.3m
2
0.9m3

4.0m
1.0m
0.3m
3
0.2m3

2.0m
1.0m
0.5m
1
1.0m3
L +/- 3%
3.0m
1.0m
0.5m
2
1.5m3
W +/- 5%
4.0m
1.0m
0.5m
3
2.0m3
H +/- 5%
1.0m
1.0m
0.5m
0
1.0m3

1.5m
1.0m
1.0m
0
1.5m3

2.0m
1.0m
1.0m
1
2.0m3

3.0m
1.0m
1.0m
2
3.0m3

4.0m
1.0m
1.0m
3
4.0m3

Hexagonal Iron Wire Netting

Hexagonal Iron Wire Netting
Weaving:normal twist,reverse twist
Characteristics:high tensile strength and flexibility
Hexagonal Iron Wire Netting
Weaving:normal twist,reverse twist
Characteristics:high tensile strength and flexibility,durability

Hexagonal Wire Netting is also known as Chicken netting. Rabbit netting, Poultry Wire.
Material: Super quality low carbon steel wire. Stainless steel wire. Electro galvanized wire. Hot dipped galvanized wire.
Weaving: normal twist, reverse twist
Electro Galvanized before Weaving
Electro Galvanized after Weaving
Hot Dipped Galvanized before Weaving
Hot Dipped Galvanized after Weaving
PVC Coated Before or after Weaving
Uses: It is extensively used in industrial and agricultural construction as reinforcement and fencing. It is also used as Fence for Poultry Cage. Fishing, Garden and Children playground, etc.
Packing: in waterproof paper,custom packing available at request
Hexagonal wire netting
mesh
Min. Gal.v.
G/SQ.M
Width
Wire Gauge (Diameter)
BWG
Inch
mm
Tolerance(mm)
3/8"
10mm
±1.0
0.7mm - 145
2' - 1M
27, 26, 25, 24, 23
1/2"
13mm
±1.5
0.7mm - 95
2' - 2M
25, 24, 23, 22, 21
5/8"
16mm
±2.0
0.7mm - 70
2' - 2M
27, 26, 25, 24, 23, 22
3/4"
20mm
±3.0
0.7mm - 55
2' - 2M
25, 24, 23, 22, 21, 20, 19
1"
25mm
±3.0
0.9mm - 55
1' - 2M
25, 24, 23, 22, 21, 20, 19, 18
1-1/4"
31mm
±4.0
0.9mm - 40
1' - 2M
23, 22, 21, 20, 19, 18
1-1/2"
40mm
±5.0
1.0mm - 45
1' - 2M
23, 22, 21, 20, 19, 18
2"
50mm
±6.0
1.2mm - 40
1' - 2M
23, 22, 21, 20, 19, 18
2-1/2"
65mm
±7.0
1.0mm - 30
1' - 2M
21, 20, 19, 18
3"
75mm
±8.0
1.4mm - 30
2' - 2M
20, 19, 18, 17
4"
100mm
±8.0
1.6mm - 30
2' - 2M
19, 18, 17, 16

Hexagonal Mattress

ISO9001 / Manufacturer
1>.Hexagonal Mattress
2>.Mesh:60*80,80*100,100*150mm
3>.Wire: 2.0mm-4.0mm
4>.One diaphragm one meter
Hexagonal Mattress / Gabion Mattresses


We manufacture and assemble gabion series to satisfy needs;environment protecting development. our hexagonal double twisted wire meshe gabions have been involved in a verity of civil work such as river treatment, channel lining, slope protection, road embankment, pavement,etc.

Hexagonal Gabion Box Specification
Mesh Size(MM)
Wire diameter(MM)
PVC Wire/(MM)
Max.Width(M)
60X80
2.0-2.8
2.0/3.0-2.5/3.5
4.3
80X100
2.0-3.2
2.0/3.0-2.8/3.8
4.3
80X120
2.0-3.2
2.0/3.0-2.8/3.8
4.3
100X120
2.0-3.4
2.0/3.0-2.8/3.8
4.3
100X150
2.0-3.4
2.0/3.0-2.8/3.8
4.3
120X150
2.0-4.0
2.0/3.0-3.0/4.0
4.3


Main characteristics of stone netting:

1>.good adaptablity adapting to the deformation of the groundwork;
2>.high flexibility not likely to be broken tearing a large range of deformation without collapsing;
3>.anticorrosive and washing away resisting high resistance to natural damage,bad climate,quake and impact;
4>.with both penetratability and non-penetratability,damage caused by fluid static power is prevented;
5>.easy construction, not need special technique,only putting stones into the gabions and tiding to the gabion opening

We can produce the gabion box as per your requirements. Welcome the clients to send us the specifications. We'll reply you ASAP.

Hexagonal Mattress

ISO9001 / Manufacturer
1>.MattressGabion Mesh
2>.Mesh:60*80,80*100,100*150mm
3>.Wire: 2.0mm-4.0mm
4>.One diaphragm one meter
Mattress Gabion Mesh / Gabion Mattresses


We manufacture and assemble gabion series to satisfy needs;environment protecting development. our hexagonal double twisted wire meshe gabions have been involved in a verity of civil work such as river treatment, channel lining, slope protection, road embankment, pavement,etc.

Hexagonal Gabion Box Specification
Mesh Size(MM)
Wire diameter(MM)
PVC Wire/(MM)
Max.Width(M)
60X80
2.0-2.8
2.0/3.0-2.5/3.5
4.3
80X100
2.0-3.2
2.0/3.0-2.8/3.8
4.3
80X120
2.0-3.2
2.0/3.0-2.8/3.8
4.3
100X120
2.0-3.4
2.0/3.0-2.8/3.8
4.3
100X150
2.0-3.4
2.0/3.0-2.8/3.8
4.3
120X150
2.0-4.0
2.0/3.0-3.0/4.0
4.3


Main characteristics of stone netting:

1>.good adaptablity adapting to the deformation of the groundwork;
2>.high flexibility not likely to be broken tearing a large range of deformation without collapsing;
3>.anticorrosive and washing away resisting high resistance to natural damage,bad climate,quake and impact;
4>.with both penetratability and non-penetratability,damage caused by fluid static power is prevented;
5>.easy construction, not need special technique,only putting stones into the gabions and tiding to the gabion opening

We can produce the gabion box as per your requirements. Welcome the clients to send us the specifications. We'll reply you ASAP.

Hexagonal Mesh Netting

Hexagonal Mesh Netting
Chicken Wire,Rabbit Wire,
Gabion Mesh,Poultry Wire
Chicken Netting
Hexagonal Netting



Material
:High quality steel wire ,galvanized wire, stainless steel wire or PVC coated wire.
Weaving
meth
od
Twist and Reverse Twist
Netting type
Electro Galvanized before weaving
Electro Galvanized after weaving
Hot dipped Galvanized before weaving
Hot dipped Galvanized after weaving
PVC coated before or after weaving
Usage
Extensively used as reinforcement and fencing in industrial, agricultural and constructions. It is also used as Fence for Poultry Cage, Fishing, Garden and Children playground, etc


Maishi Standard Specification

Maishi Hexagonal wire netting
mesh
Min. Gal.v.
G/SQ.M
Width
Wire Gauge (Diameter)
BWG
Inch
mm
Tolerance(mm)
3/8"
10mm
±1.0
0.7mm - 145
2' - 1M
27, 26, 25, 24, 23
1/2"
13mm
±1.5
0.7mm - 95
2' - 2M
25, 24, 23, 22, 21
5/8"
16mm
±2.0
0.7mm - 70
2' - 2M
27, 26, 25, 24, 23, 22
3/4"
20mm
±3.0
0.7mm - 55
2' - 2M
25, 24, 23, 22, 21, 20, 19
1"
25mm
±3.0
0.9mm - 55
1' - 2M
25, 24, 23, 22, 21, 20, 19, 18
1-1/4"
31mm
±4.0
0.9mm - 40
1' - 2M
23, 22, 21, 20, 19, 18
1-1/2"
40mm
±5.0
1.0mm - 45
1' - 2M
23, 22, 21, 20, 19, 18
2"
50mm
±6.0
1.2mm - 40
1' - 2M
23, 22, 21, 20, 19, 18
2-1/2"
65mm
±7.0
1.0mm - 30
1' - 2M
21, 20, 19, 18
3"
75mm
±8.0
1.4mm - 30
2' - 2M
20, 19, 18, 17
4"
100mm
±8.0
1.6mm - 30
2' - 2M
19, 18, 17, 16
Technical Note:
1,Standard roll length: 30m,50m
2,Special sizes available at request
3,Packing: in waterproof paper. Custom packing available at request.