steel reinforcing welded slab mesh

Reinforcing welded slab mesh
1 ISO 9001-2000 ,SGS,SAI Global,
2 Comply with AS/NZS4671-2000
3 Square or rectangular mesh
Reinforcing welded mesh for concrete building:

UAN STEEL manufactures reinforcing mesh to suit any concreting projects, large or small.

The reinforcing mesh is made of superior quality steel bar, with flat even surface, firm structure. It is widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, wall, etc.

UAN steel mesh products meet the highest quality standard and comply with following requirements of the Australia construction industries.

UAN Steel Meshes:
Comply with AS/NZS4671
Are SGS certified
Are SAI Global certified
Have been manufactured in ISO 9001 accredited facilities.

The Welded Wire Meshes we offer are convenient and economical reinforcement option for modern concrete structures. Meeting the application demands of designers, engineers and civil contractors, these fabrics are also simple to use and ensures maximum construction speed while retaining full design strength.

Type of Meshes :
There are two type of mesh made
Stands mesh:
Line wire diameter (nominal) 4.0 - 14.0 mm
Cross wire diameter (nominal) 4.0 14.0 mm
Line wire spacing 100 / 150 / 200 /250/ 300 /350/ 400 mm
Cross wire spacing 100 / 150 / 200 / 300 / 400 mm
Other and larger cross wire spacing freely programmable
Wire mesh length 2000 - 6000 mm
Wire mesh width 2000 -3300 mm

Non-Stands mesh:
Line wire diameter (nominal) 4.0 - 14.0 mm
Cross wire diameter (nominal) 4.0 14.0 mm
Line wire spacing min. 100 mm
larger line wire spacing in steps of 50 mm
Cross wire spacing min 25mm
above programmable in increments of 0.1 mm.
Wire mesh length: 2000 - 12000 mm
Wire mesh width: 1100 -3300 mm

AS/NZS 4671:2001 Australia/New Zealand Standard (SIZE:6000mmX2400mm)
Ref No.
Std Unit
Longitudinal
Wires mm
Edge Wires mm
Cross Wires mm
Mass Kg
SL81 (F81)
Sheet
7.6 @ 100
7.60 @ 100
7.60 @ 100
105
SL102 (F102)
Sheet
9.5 @ 200
6.75 @ 100
9.50 @ 200
80
SL92 (F92)
Sheet
8.6 @ 200
6 @ 100
8.60 @ 200
66
SL82 (F82)
Sheet
7.6 @ 200
5.37 @ 100
7.60 @ 200
52
SL72 (F72)
Sheet
6.75 @ 200
4.77 @ 100
6.75 @ 200
41
SL62 (F62)
Sheet
6 @ 200
4.77 @ 100
6 @ 200
33
SL52 (F52)
Sheet
4.77 @ 200
4.77 @ 100
4.77 @ 200
21

OUR FACTORY



WORKSHOP


PRODUCTS SHOW