Stainless steel wire cloth/woven wire cloth
Material: AISI304 or 316
Weaving: Twill
Length: 30m,50m
Twilled Weave
is produced by passing each fill wire alternately over and under two warp wires. The pattern is staggered on successive warp wires, giving the appearance of parallel diagonal lines. This weave allows the use of proportionately heavier wires in a particular mesh count (number of openings per lineal inch) than is possible in plain weave. This cloth has a wide application capable of supporting greater loads and finer filtrations.
Twill Stainless Steel Wire Mesh- AISI316
(1)weaving patterns:plain weave or twill weave
(2)type:302 3024 304L 306 306L 310 301 430etc.
(3)usage:it widely used in peroleum,chemcial industry, encironment protection, mine, airspace,paper-making,electronic,metallurgy etc.
(4)stainless steel square wire mesh sizes:
width of 48'':1m
length of 100'':30mm
(5)aperture:0.025mm-11.10mm
(6)filtration area:26%-76%
No comments:
Post a Comment