Stainless Steel Wire Netting

Stainless Steel Wire Netting
wire dia.:0.02-2.1mm
mesh:1-635mesh
heat-resisting,acid-resisting
corrosion resisting
Stainless Steel Wire Netting:
Specification:
material: ss201,202,302,304,316,316L
wire dia.:0.02-2.1mm
mesh:1-635mesh
width: 0.5m-2m
length: 10-100m/roll
features:
Stainless steel is wear-resisting,heat-resisting,acid-resisting and corrosion resisting.Just because of these characteristics,the wire mesh made of stainless steel is extensively used in mining, chemical industry, food industry and pharmaceutical industry.
Plain weave
: This is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.
Twill weave:
Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.We can supply the mesh from 30 mesh to 500 mesh.
Plain dutch weave:
Woven as a plain weave, but with the warp wires of greater diameter than the weft wires. The weft wires are very close together so that a so-called zero-mesh structure is formed; while the warp wires are thicker and arranged wider apart.
Twill dutch weave:
"Twill" indicates the warp and weft wires pass alternately above two and below two wires. "Dutch" refers to the use of a heavier warp wire diameter in conjunction with a lighter weft wire diameter. This weave shows a combination of twill and dutch weave.
Mesh Countinch
Wire Diametermm
weight(kg/)
Mesh Countinch
Wire diametermm
weight(kg/)
1*1
2.5
3.12
32*32
0.23
0.84
2*2
2.4
5.76
36*36
0.23
0.95
3*3
2.2
7.26
38*38
0.19
0.68
4*4
1.63
5.31
40*40
0.19
0.72
5*5
1.22
3.72
50*50
0.152
0.57
6*6
0.91
2.48
60*60
0.122
0.44
8*8
0.91
3.31
80*80
0.102
0.41
10*10
0.91
4.14
100*100
0.081
0.32
12*12
0.71
3.02
120*120
0.081
0.39
14*14
0.46
1.48
150*150
0.061
0.27
16*16
0.375
1.12
160*160
0.061
0.29