Woven Mesh Gabion

Woven Mesh Gabion
1-Mesh wire Gi. Dia.:2.0mm,2.2mm,2.7mm
2-Selvedge Wire Gi.Dia:2.7mm,3.0mm,3.4mm
3-IBest Service

Woven mesh gabion
boxes are hexagonal,
double-twisted wire-mesh structures
.

The gabion boxes are divided into chambers by inserting diaphragms every meter. The wire used for making the boxes is made of thickly plated mild steel. The gabion units are delivered to the site flat-packed.
The double-twisted mesh connections of the woven mesh prevent the mesh from coming apart if the wire is cut or snaps, in each case the location of the fault is restricted to the neighbouring areas. The units are attached to each other using stitching wire and/or staples.

Technical characteristics
The mesh/wire versions generally used are summarised in the table below. In order to reinforce the structure, all edges are strengthened with a thicker wire. For the sizes and size tolerances belonging to the different versions see the table dimensions below:

Length (m)
Width (m)
Height (m)
1,0
0,5
0,5
1,5
1
0,5
2
1
0,5
3
1
0,5
4
1
0,5
1,5
1
1
2
1
1
3
1
1
4
1
1
Wire-mesh
Wire-mesh hole size
60 x 80 mm
Wire size
2,7 mm
Size tolerance of structures
Lenght
1,5 - 2,0 - 3,0 - 4,0 m ± 3%
Width
0,50 - 1,0 m ± 5%
Height
0,5 - 1,0 m ± 5%
Woven mesh gabion products
In the case of products with a PVC
coating the coating is +0.50 mm thick!


Woven mesh gabion mattresses
Length (m)
Width (m)
Height (m)
3-4-5-6
2
0,17-0,23-0,30

Wire-mesh
Wire-mesh hole size
60 x 80 mm
Wire size
2,2 mm
Size tolerance of structures
Length
3 - 4 - 5 - 6 m ± 3%
Width
2 m ± 3%
Height
0,17 - 0,23 - 0,30 m ± 5%
Woven mesh gabion mattresses
In the case of products with a PVC
coating the coating is +0.50 mm thick!

Gabion made of welded steel mesh
Gabion units made of welded steel mesh are
square wire-mesh structures
.
Panels are placed every metre inside the gabion units. The wire used for making the boxes is made of thickly plated steel. The gabion units are delivered to the site bundled per panel or partly assembled.
The units can be assembled with spiral binders, stitching wire and/or staples.

Technical characteristics
The mesh/wire versions generally used are summarised in the table below. In order to strengthen the head wall of the structures, they can be constructed of steel wire with a larger diameter. For the sizes and size tolerances belonging to the different versions see the table of type dimensions below:
Lenght (m)
Width (m)
Height (m)
1 - 1,5 - 2 - 2 - 4 - 5
0,5 - 1 - 1,5 - 2
0,3 - 0,5 - 1
Mesh-wire
Mesh hole size
75 x 75 mm
Wire size
3-4,55 mm
Size tolerance of structures
Lenght
1,5 - 2,0 - 3,0 - 4,0 m ± 0,5%
Width
2 m ± 0,5%
Height
0,3 - 0,5 - 1,0 m m ± 0,5%






Welded mesh gabion box
In the case of products with a PVC
coating the coating is +0.50 mm thick!